Double checked the manual as well to make sure the pins were in the right place. I've decided be giving up on building either. Anyway my current plan of action is this. 1. I have an 8 pin connector plugged into the socket near the CPU. Source
Thanks for any help you can give. The 12 volt rail thing I'm not sure about. Cables can only go in one way round and drives and motherboards no longer need jumpering. Help please solved My laptop doesn't detect nvidia graphic card anymore. check over here
This build lasted two years breaking down only this February owing to what I strongly suspect are dodgy drivers from nvidia. (chance meeting with a computer tech in work, I asked Note: If it has onboard video - connect that as-well - do you see anything on the monitor (and have you tested the monitor!?) . What's New?
so give it a try. Privacy Steam Group Twitter Support RPS Register Help Remember Me? My statement clearly referred just to my experience - you then made a sweeping contradictory statement (which was, of course, just your experience but you didn't say that) so I qualified I tried to associate a driver to both of them but couldn't find a file windows would accept.
Cut the crap, please. Hate those things, they always need so much force to even get them partially flush. In fixing my old computer, building this one and now fixing this one I've learnt a great deal. https://forums.geforce.com/default/topic/392178/should-i-upgrade-my-bios-/ I care not how hard it is, or what problems I can cause.
The 12 volt rail thing I'm not sure about. It hadn't been right since a nvidia driver update in February which started all the computer trouble I've been having. its kind of hard to help you. I purchased a geforce mx4000 and went to install it....
I'm not giving up because something's difficult. https://forums.geforce.com/default/topic/484745/monitor-won-39-t-turn-on-with-new-geforce-gtx-460-1gb-card/ I went out and purchased a GeForce FX 5500 AGP board because that is what my PCI board is. Also Check first to make sure your CPU Heatsink and Fan 3 or 4 pin plug is fully seated. I can't get my nvidia 560 ti video card to detect.
nothing. http://gamesversion.com/nvidia-geforce/nvidia-geforce-mx-440.php So, my next move was trying to install the mx4000 on my other machine win98 p2 (i believe). Won't power on Computer specs at the bottom of my post. If I can't fix it I'll get a computer tech I've had do a diganostic for me before take a look.
Make sure you back up any pertinent data and then do a full format if your loading XP. If you're new to Tech Support Guy, we highly recommend that you visit our Guide for New Members. If you're not already familiar with forums, watch our Welcome Guide to get started. have a peek here I've read the other post that the PSU could be the issue but I have more power than the other post.
Now my computer won't power on at all. If nothing thusfar - remove the CPU - repeat as above . I've already tried flipping out the CMOS battery (very carefully and gently removed) for a few minutes then putting it back in to no effect.
Does the computer recognize the card in the device manager when you boot back up?It would be tough to test the mobo, specifically the pci-e slots without having another card handy Click here to join today! Please let me know if you have any idea what the problem could be. This may be true based on your enviroment alone.
I returned toe mx4000 for a refund, too frustrated to even risk trying to put it in the xp machine and fry it as well. Ultramon sees only two monitors, which is why I am guessing that I need nView DualView working so that Ultramon can see three monitors.Does this make any sense? Nvidia 560 ti vs HD 7850 Need help with nVidia GTX560Ti installation! http://gamesversion.com/nvidia-geforce/nvidia-geforce-gt-240-vs-gt-220.php Only the ATX plug worries me, I'd have to use a massive amount of force to get it to sit fully flush, the plastic clip on it isn't over the ridge
They need to be a snug fit to avoid arcing but they should require significant force - if there was something in one of the slots or a pin was bent, You need to run PC's in very cool enviroments for best performance and the PC life cycle. It only needs one 4 pin 12v rail. anyway to test that?
fantastik250Jun 13, 2012, 2:13 PM +1^Correct, you need to use the 8pin and 6pin together. I'm running a new 550 W PSU (http://www.newegg.com/Product/Product.aspx?Item=N82E16817371016). It's worth remembering that we constantly recommend people build PCs because "it's cheaper, easier and better" but we forget we have a LOT of experience, a LOT of patience and know If that still doesn't work, try opening up device manager, go under display adapters, and uninstall.
They are letting me use their xp machine while I get this whole mess figured out. I'll also try and make sure the powerplug clips down properly. It should slide right in. If not, you can probably take it to a local computer shop (Best Buy if you're in the US) and let them test it out.
In further response to Chaz I very carefully researched all the parts when I built this computer and made sure they were compatiable.